Features of Laser Marking Machine Etan 12/20/25/30

ETAN laser provides a fast, flexible and efficient way to permanently mark a wide variety of materials such as Metals, Plastics, Ceramics and Silicon.

• First and last pulse equally useable
• Bitmap marking compatible
• High repeatability/stability design
• Status monitoring and safe shut down
• High speed marking (MHz repetition rate)
• Long using time : the average using time more than 100000 hours
• Good stability and free maintenance : No need to maintenance for laser advice
• High quality gray scale marking

Highlights

• High Marking Speed
• Perfect beam quality
• Very Compact
• Low Consumption
• Maintenance Free

Advantages of Laser Marking Machine Etan 12/20/25/30

• Fiber lasers are up to ten times more efficient than traditional YAG or CO2 laser systems. Consuming little to no energy when not active, the annual energy saving can attract government grant funded energy efficiency programs for industry.
• Fiber lasers have no optic to adjust or align, and no lamp to replace. Maintenance is minimal and so utilization and up-times are maximized. The lasers really are designed as shop floor industrial tools.

• Auto Parts	• Packaging
• Hardware	• Solar Industry
• Watch & Clock	• Medical Device
• Marking anodized & painted material	• Marking Metal & Plastics
• Serial Numbers	• Data Codes
• Manufactures Information	• Materials Flow
• Barcodes	• 2D Data Matrix
• Logos	• Graphics

Applications of Laser Marking Machine Etan 12/20/25/30

Applications

Technical Specifications of Laser Marking Machine Etan 12/20/25/30

Model No	ETAN-12	ETAN-20	ETAN-25	ETAN-30
Laser average output power	12 W	20 W	25 W	30 W
Wavelength	1064 nm
Output Power Stability (Typical)	5%		2%
Power Adjusting Range	1 ~ 100 %
Resolution Frequency	25-200 KHz		30-200 KHz
Beam Quality (M²)	< 2		< 3
max. Linear Speed	7000 mm/s
Marking Depth	0.01~0.5 mm (Material Depended)		0.01~1.0 mm (Material Depended)
Red Alignment Laser	Yes
Min. Line Width	0.03 mm
Marking Area	145 x 145 (standard) 175 x 175 / 300 x 300 (Optical)
Anti High Reflect	With Optic Isolator
Min. Character Height	0.2 mm
Repetition Accuracy	0.2 µm
Marking Format	Figure, Characters, Barcode, Data matrix, Data, Order of runs, Lot number, Serial number, File chaining
Marking character Type	Support PLT, DXF, BMP file etc.,using SHX TTF character storage directly
Cooling system	Air Cooling System
Ambient Temperature Range	0°C top + 45°C
Marking Method	Static or Flying Marking
Power Supply	220V / 50Hz
Specifications are subject to change without notice